 View Full-Size Image |
MANUAL SCREEN PRINTING CAROUSEL MOD. AURE 4 STATIONS |
|||||
|
Price:
Euro 3.444,25
+tax
|
||||||
|
Ask a question about this product Suggest this product to a friend
|
||||||
|
Complete with platen 61x37 cm with crew-neck and articulated arms. Frame format 50x60 cm. This is a manual screen printing machine, with several stations, suitable to print on every kind of fabric and rigid supports; it is ideal for the small and medium stretches, and it can be used by one or more operators; the frameholding arms are articulated and adjustable, in order to faciltate the mounting and the registration of the printing screens; during the lifting phase, the frame holding arms are assisted by return springs, in order to facilitate the lifting movement; such springs are independently registrable.
During the descending phase of the frame a mechanical system realized with steel details and high precisions bearings guarantee the centering of the frame on the piani stampa; sia i cuscinetti che i centratori sono indipendentemente registrabili; the printing plans (platens) are height adjustable and can rotate either contemporarily or independently from the frames; the precision of the rotating system is guaranteed by a chassis, inside which a great precision ball bearing lodged inside.
the platens (supplied with the machine) are realized with medium thick laminboard; in the AURE 50x50 they have a measurement of 37 x 61 cm with crew-neck; in the AURE 70 x70 they have a measurement of 55 x 80 cm, and are rectangular shaped, without the crew-neck
the machine, due to transportation requirements, is delivered with the arms and the platens disassembled and lodged inside the machine, as the structure is fully panelled
|
||||||
You also may be interested in...
|
||||||
2049* products for all your screen printing needs.
*Real time data always available.
Your Cart is currently empty.
Link Exchange?
Do you have Blog, a Forum or... a site?
Exchange our links to build reputation!
Fill this form to exchange a Link with us >>
Search in Q&A
Write here your question
This is Franco Ratto,
Technical Director of Screen Printing Store.
Feel free to ask me your tech questions about printing or commercial informations.
Screenprinting Q&A
-
Hi I need to silkscreen on fabric, but with a particular effect: I what that the texture of the fabric will stay visibile under the colour. Is is possible? What`s the best ink to use it for this effect?
Penny, NL Friday, 26 August 2011Water based inks are suitable to silk print on fabric with the effect you need, I can suggest you Modatex ink. Modatex ink viscosity is suitable for 55 thread/cm frame but it`s really difficult planning the effect on the fabric without precise informations. -
Does a screen every get too old to use? OR Is it possible to clean an old screen to be good-as-new?
Holly, Vermont Sunday, 24 July 2011Holly good morning and thank you for writing.
With the screen two things get old: the emulsion and the fabric.
The emulsion gets old after about two thousand passes.
The fabric gets old after about twenty thousand passes.
When the emulsion gets old, you can remove it with a specific product called "stripper", wash very well, let it dry, and then recoat it with a new layer of emulsion.
When the fabric gets old, you must remove it, then stretch the frame with a new fabric.
When the frame gets old I suggest you throw it away.
-
Is it possible to screen print on screens 2m wide by 5m long? What is the largest size possible? Can I unroll plastic sheet off a roll and screen print 5m lengths? Thank you very much.
Stefan, Spain Friday, 22 July 2011The maximum size of a screen could be 3 m wide by 6 m long.
However the problem is not to make the screen and engrave it.
The real problem is to use it by hand and without a special machine.
For example, it would be very difficult to pull a 2 or 3 meter long squeegee by hand.
I would suggest that it would be better to print your 5 meter sheet in smaller sections on a smaller screen. -
I just bought SCREEN - SOL 400 BLU and i don't have 5000w halogen bulb, what alternative can i use to replace that for exposure? thanks in advance
Jayson, USA Friday, 22 July 2011It is not important whether you have 5000w or less, what is important is that it must be a UV light.
For example, a fluorescent tube of 36 w is enough to engrave your screen (with whatever emulsion you decide to use) if it is a UV tube.
Screenprintingstore has in stock kits of fluorescent tubes UV lights.
An alternative is to use a special kind of emulsion, e.g. the QLT Emulsion, which we have in stock. With this you can engrave your screen under a standard cold light (blue light 5000-6000 °K).
I hope this answers your question -
Hello, I silk screenprint on paper with a 120 thread frame with a Serimat Red ink that when it dries it looses its covering and then I should apply the ink again. How can I solve the problem?
Johnny, UK Thursday, 14 July 2011Does the problem arises printing big and regular areas? It could depends on the permeability of the paper that soaks up the ink, so the ink itself goes into the fibre without remain on the paper surface. A frame of 120 thread it`s too much for big areas, maybe it`s better a thicker 77 thread frame that allows to a higher quantity of ink to pass and deposit on the paper. You should also try to change paper and silk screenprint using a less absorbent and more compact one so the ink will dry before go into the fibre.