 View Full-Size Image |
MANUAL SCREEN PRINTING MACHINE MOD. PANT WITH GUIDED SQUEEGEE 140X250 WITH AN ALLUMINIUM VACUUM BED |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Price:
Euro 16.905,00
+tax
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Ask a question about this product Suggest this product to a friend
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Pantograph opening
Print format 140x250 cm
Alluminium registrable vacuum bed.
Such equipment is used to print medium to big formats; this series offers a better manageability in the loading/unloading phasis, as well as in the printing phase, and a more practical lodgement of the frames inside a hard frame holder.
the linear movement of the squeegee takes place on a sliding bearings bridge, on a special steel calibrated bar; according to the thickness of the objects to be printed it is possible to adjust the height of the frame in respect of the printing top, operating on the 4 wheels placed on the print frame holder board (maximum height: 130 mm) by operating the wheels located on the base, it is possible to obtain the adjustment of the printing top on the two tops X and Y in order to achieve the first print centering;
the blockage of the frameholder during printing takes place through two electromagnets;
the rise of the printing machine is power-assisted by four balancing weights placed diagonally to the base of the machine; the printing machine is kept in a high position by two electromagnets placed laterally; the electromagnets are disconnected through a foot pedal for the machine operator, or (alternatively) through a bar placed lengthways to the base of the printer, and it can be switched on by a light pressure of the knee; the chosen device must be specified when placing an order; once the magnets are disconnected, the top of the printing machine can be lowered and another printing session can start;
the printing top is realized in aluminium in the vacuum bed version (vacuum); the vacuum automatically intervenes during the descending phase of the printing machine; such equipment does not need compressed air, as the vacuum of the top is generated by an electric fan positioned under the base; the printing top with a blowing device (air cushion) can be optionally ordered.
the printing machine is realized fully respecting the current laws in force for the application of the trademark "EU"; it also comes with a use and maintenance manual. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
We suggest you...
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
You also may be interested in...
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2049* products for all your screen printing needs.
*Real time data always available.
Your Cart is currently empty.
Link Exchange?
Do you have Blog, a Forum or... a site?
Exchange our links to build reputation!
Fill this form to exchange a Link with us >>
Search in Q&A
Write here your question
This is Franco Ratto,
Technical Director of Screen Printing Store.
Feel free to ask me your tech questions about printing or commercial informations.
Screenprinting Q&A
-
Hi I need to silkscreen on fabric, but with a particular effect: I what that the texture of the fabric will stay visibile under the colour. Is is possible? What`s the best ink to use it for this effect?
Penny, NL Friday, 26 August 2011Water based inks are suitable to silk print on fabric with the effect you need, I can suggest you Modatex ink. Modatex ink viscosity is suitable for 55 thread/cm frame but it`s really difficult planning the effect on the fabric without precise informations. -
Does a screen every get too old to use? OR Is it possible to clean an old screen to be good-as-new?
Holly, Vermont Sunday, 24 July 2011Holly good morning and thank you for writing.
With the screen two things get old: the emulsion and the fabric.
The emulsion gets old after about two thousand passes.
The fabric gets old after about twenty thousand passes.
When the emulsion gets old, you can remove it with a specific product called "stripper", wash very well, let it dry, and then recoat it with a new layer of emulsion.
When the fabric gets old, you must remove it, then stretch the frame with a new fabric.
When the frame gets old I suggest you throw it away.
-
Is it possible to screen print on screens 2m wide by 5m long? What is the largest size possible? Can I unroll plastic sheet off a roll and screen print 5m lengths? Thank you very much.
Stefan, Spain Friday, 22 July 2011The maximum size of a screen could be 3 m wide by 6 m long.
However the problem is not to make the screen and engrave it.
The real problem is to use it by hand and without a special machine.
For example, it would be very difficult to pull a 2 or 3 meter long squeegee by hand.
I would suggest that it would be better to print your 5 meter sheet in smaller sections on a smaller screen. -
I just bought SCREEN - SOL 400 BLU and i don't have 5000w halogen bulb, what alternative can i use to replace that for exposure? thanks in advance
Jayson, USA Friday, 22 July 2011It is not important whether you have 5000w or less, what is important is that it must be a UV light.
For example, a fluorescent tube of 36 w is enough to engrave your screen (with whatever emulsion you decide to use) if it is a UV tube.
Screenprintingstore has in stock kits of fluorescent tubes UV lights.
An alternative is to use a special kind of emulsion, e.g. the QLT Emulsion, which we have in stock. With this you can engrave your screen under a standard cold light (blue light 5000-6000 °K).
I hope this answers your question -
Hello, I silk screenprint on paper with a 120 thread frame with a Serimat Red ink that when it dries it looses its covering and then I should apply the ink again. How can I solve the problem?
Johnny, UK Thursday, 14 July 2011Does the problem arises printing big and regular areas? It could depends on the permeability of the paper that soaks up the ink, so the ink itself goes into the fibre without remain on the paper surface. A frame of 120 thread it`s too much for big areas, maybe it`s better a thicker 77 thread frame that allows to a higher quantity of ink to pass and deposit on the paper. You should also try to change paper and silk screenprint using a less absorbent and more compact one so the ink will dry before go into the fibre.